About this product
Use this two-flute bit where fine finish is needed. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per turn yield a smooth surface, with a feed rate slightly reduced.
Specifications
- Cuts: Wood, MDF, Plywood
- Direction: Down-Cut
- Diameter: 1/2"
- Cut Depth: 1/4"
- Angle: 0 Degrees
- Radius: .015 (.4mm)
- Cutting Height: 2"
- Shank: 1/2"
- Overall Length: 4-1/4"